RS PRO K型熱電偶 250mm長,1.5mm直徑,-100°C至1100°C 847-1034 847-1034

RS PRO Type K Thermocouple 250mm Length, 1.5mm Diameter, -100°C 1100°C 847-1034
詢價商品請諮詢取得報價及交期
商品包含 1 種型號,請點選「立即選購規格」挑選

💡 重要通知:

因中東戰爭造成原物料波動影響,若訂單成立後進貨成本發生重大異動,我們將主動聯繫您協商處理。造成不便,敬請見諒。

登入即享專屬優惠價格
付款月結報帳 / 信用卡 / 銀行轉帳
運送宅配快速到貨,滿 NT$ 999 元即享免運!

選購型號

此商品所有型號都需詢價,請按「訂購諮詢」取得報價及交期
商品型號IABP-64152109
RS PRO Type K Thermocouple 250mm Length, 1.5mm Diameter, -100°C → 1100°C 847-1034
原廠型號 847-1034
諮詢/訂購後通知
1piece

商品介紹

Feature

  • RS Pro Type K ANSI Mineral Insulated Thermocouples with Plain Pot Seal and 1 m Lead. From RS Pro a range of type K thermocouple temperature sensors conforming to ANSI MC96.1. standards. These sensors or probes have a durable construction and feature a stainless steel 310 probe sheath and a 1 m PFA Teflon insulated lead. The mineral insulated flexible sheath can be bent and formed to suit a wide range of applications. The thermocouple has an insulated hot junction for a reduction in electrical interference and a plain pot seal with a temperature rating of 200°C. How does a Thermocouple Work . A thermocouple is a sensor used to measure temperature in a range of different processes and consists of two wire legs made from different metals joined together at their two ends to form two junctions. The hot, or measuring junction is connected to the body whose temperature is going to be measured. The cold junction or reference junction is connected to a body of known temperature. When the measuring junction is placed on something hot a voltage or potential difference between this and the reference junction occurs. This voltage can then be converted into a temperature measurement using thermocouple reference tables. This process is also known as the Seebeck Effect. What is an Insulated Junction . An insulated or ungrounded junction is where the thermocouple wires are welded together and fully covered by but insulated from the outer protective sheath, often by the use of mineral insulation. The advantage of this is that there is a reduction in electrical interference and a stable reading. What is Mineral Insulation . Mineral insulation is used to insulate the thermocouple wires from one another and from the metal probe sheath that surrounds them. The sheath is filled with a highly compacted magnesium oxide powder that prevents the conductors from making contact with one another other than at the fixed junction. The high density of the mineral powder enables the thermocouple to have a rapid response as it promotes a fast heat transfer between the conductor and the sheath. Mineral insulation also helps to protect the thermocouple wire from environmental damage including corrosion, prevents electrical interference and allows the cable to be flexible whilst maintaining its mechanical strength. Features and Benefits. Durable 310 stainless steel probe sheath for protection against corrision and oxidation Conforms to ANSI MC96.1 standards Mineral insulation for flexibility and durability Insulated hot junction for reduction in electrical interference PFA Teflon insulated lead for resistance to oils, acid, fluids and good mechanical strength and flexibility Probe temperature range to +1100°C maximum. Applications. Type K Thermocouples (Nickel-Chromium / Nickel-Aluminium) are the most common type of thermocouple and are both accurate and flexible with a wide temperature range. Typical applications for these mineral insulated Type-K thermocouple probes include heat exchangers, power stations, brick and cement kilns, heat treatment and annealing furnaces, thermostats, food thermometers, vehicle diagnostics and in laboratories

Specifications

  • Quantity:1piece
  • Thermocouple Type:K
  • Probe Diameter:1.5mm
  • Probe Length:250mm
  • Probe Material:Stainless Steel
  • Termination Type:Cable
  • Cable Length:1m
  • Standards Met:ANSI
  • CODE No.:847-1034
以上圖片及相關資訊由 RS PRO 提供。
若有現場安裝、說明或特殊配送需求,歡迎事前與科研市集聯繫。部分商品因供應條件限制,可能無法提供相關服務,敬請見諒。
有任何商品上面的問題?
別擔心,讓科研市集來為你服務!
立即諮詢客服
最懂你的專屬採購模式
需要單位的最優價格及服務嗎? 我們的專業團隊能幫到你!
前往了解方案