I see strength! Tensile jig set for general purpose tabletop tensile compression testing machine.
Comes with parallel fastening mold jaw (JM-JFM-500 N x 2 pcs) for tensile test.
Color touch panel provides good visibility and easy operation.
It comes with a high-precision load cell, and you can use it as soon as you turn on the power.
Test speed can be easily set digitally.
Displacement display is provided as standard.
Comes standard with PC installation software.
The jig (attachment) used in the force gauge and push-pull gauge can also be used. *M6 screws are used when using the M6 onesideadapter.
It is connected to the mini printer AD-8126 (sold separately), and the maximum load and displacement can be printed out.
Space-saving design that can be used on a desk.
A force measuring machine that replaces the force gauge and push-pull gauge.
Can handle a variety of material tests.
Specification
Accessory Jig: Parallel Fastening Type Jaw for Tensile Test (Opening Width: 10 mm) Top and Bottom
Maximum testing capacity: 500 N
Crosshead stroke: 400 mm
Effective stroke (when using standard parallel clamp jaw): 315 mm
Crosshead speed range: 10~300 mm/min/within ±5% of the set value (unloaded)
Crosshead speed and test force capacity: The maximum test force capacity can be tested over the entire speed range.
Displacement indicator: 0.0 mm (minimum 0.1 mm)
Test force measurement accuracy (when using a 500 N load cell): ±0.2% F.S
Test force display resolution (when using a 500 N load cell): 0.1 N
Supplied Software: MCT-Logger
Power: 90~240 VAC 1Φ 50/60Hz
Body Dimensions: 250 (W) x 408 (D) x 711 (H) mm
Mass: 17 kg
Accessories: Owner's Manual, Load Cell for 500 N, Software for PC (CD-ROM), USB Cable, Parallel Fastener Jaw (JM-JFM-500 N) x 2, General Calibration Certificate