I see strength! This is a compression jig set for a high rigidity and high durability tabletop tensile compression testing machine with high precision ball screws and thick crossheads.
Compressed pressure receiving plate (J-C3-1KN-U x 2) for compression test is included.
Color touch panel provides good visibility and easy operation.
It comes with a high-precision load cell, and you can use it as soon as you turn on the power.
Test speed can be easily set digitally.
Displacement display is provided as standard.
Comes standard with PC installation software.
The jig (attachment) used in the force gauge and push-pull gauge can also be used. *M6 screws are used when using the M6 onesideadapter.
It is connected to the mini printer AD-8126 (sold separately), and the maximum load and displacement can be printed out.
Space-saving design that can be used on a desk.
A force measuring machine that replaces the force gauge and push-pull gauge.
Can handle a variety of material tests.
Specification
Accessory jig: compression receiving plate for compression test (φ60 mm) top and bottom
Maximum testing capacity: 500 N
Crosshead stroke: 370 mm
Effective stroke (when using standard parallel clamp jaw): 285 mm
Crosshead speed range: 10~300 mm/min/within ±5% of the set value (unloaded)
Crosshead speed and test force capacity: The maximum test force capacity can be tested over the entire speed range.
Displacement indicator: 0.0 mm (minimum 0.1 mm)
Test force measurement accuracy (when using a 500 N load cell): 500 N to 50N: ±0.2% F.S, 50 N to 5N: ±2% of the indicated value, 5 N or less: ±0.1 N or less
Test force display resolution (when using a 500 N load cell): 0.01 N (0.1 N display when exceeding 100 N)
Supplied Software: MSAT-Lite
Power: 90~240 VAC 1Φ 50/60Hz
Body Dimensions: 250 (W) x 408 (D) x 711 (H) mm
Mass: 18 kg
Accessories: Owner's Manual, 500 N Load Cell, PC Software (CD-ROM), USB Cable, Compression Plate (J-C3-1KN-U) x 2