For measurement of temperature and humidity in test rooms that are prone to high humidity, or in growing environments for animals and plants
Accurate measurement of temperature, humidity and saturation is very important to ensure product quality and the growth of crops.
Take advantage of our thermal conductivity hygrometer and saturation meter, which are in principle not affected by condensation.
Equipped with a humidity sensor based on a new principle
▼ Heat conduction type humidity sensors do not condense and are less susceptible to chemical substances because the humidity sensing part is heated to several hundred degrees.
Outstanding high humidity response
▼ Accurate measurement is possible due to the fast response and no saturation even in high humidity zones
Measurement by saturation, which is easy to use for plant growth
▼ The humidity condition, which is important for the cultivation environment of crops, can be measured by the index "saturation difference" which is directly connected with the growth of crops.
Accurate measurement in draft form
▼ The ventilated type is suitable for measurement in places and atmospheres where air tends to get trapped.
Easy maintenance!
▼ The measuring section can be easily replaced in a unit configuration.
Specification
Humidity
▼ Sensors: Heat Conductive
▼ Output: Relative Humidity
▼ Measuring range: 0~100%rh (noncondensing)
▼ Accuracy rating: ±5%rh(At 25°C and 50%rh)
▼ Response time: 60 seconds or less (90% response at constant 25°C)
▼ Output signal: 4~20 mA DC (in the measurement range)
▼ Load resistance: 500 Ω or less
Temperature
▼ Sensor: Thermistor
▼ Measurement Range: 0~60°C
▼ Accuracy rating: ± (0.5+0.02|T-25|) °C T: ambient temperature
▼ Response time: 6 minutes or less (90% response, step from 10 degrees C to 25 degrees C, in still air)
▼ Output signal: 4~20 mA DC for 0~60°C
▼ Load resistance: 500 Ω or less
Sensor part compatibility: compatibility
Operating Temperature Range: 0~60°C
Supply voltage (power consumption): 24 VDC ±10% (approx. 4VA)
Connection method: Terminal connection (M3.5 x 7)
Mounting Method: Screw (M5 x 2)
Material: Steel Plate
Mass: Approx. 1.3 kg
Other: Output compensation (0 shift) ±5% humidity response variable function (maximum time constant 64 s)