This is an environmentally-friendly CFC-free air dryer.
Water vapor in compressed air is adsorbed and removed by an adsorbent (desiccant).
Equipped with an energy-saving dew point setting function, exhaust of purge air stops when the dew point falls below the set dew point to reduce air loss.
*The product is delivered on the vehicle. If it is necessary for the transportation, loading and installation, please arrange a supplier who can handle it. (The manufacturer cannot arrange it. Thank you for your understanding. )
Specification
Processing inlet air volume (m^3/min): dew point -40°C/4.20, dew point -60°C/2.94
Processing outlet air volume (m^3/min): dew point -40°C/3.60, dew point -60°C/2.10
Processing and regeneration air volume (m^3/min): dew point -40°C/0.60, dew point -60°C/0.84
Weight: 110 kg
Connection Diameter (Air Inlet/Outlet): Rc1/2
Connection Diameter (Regenerative Air Outlet): Rc1
Fluid Used: Compressed Air
Working (gauge) pressure: 0.39~1.0 MPa
Ambient temperature: 2~40°C
Input air temperature humidity: 5~50°C saturation or less (no drain water)
Power: Single phase 100~230 V 50/60Hz
Dimensions: 335 x 589 x 1475 mm
Accessory Inlet Filter Element: MSF700D/EMS700 H
Attached Outlet Filter Element: LSF700/ELS7000
Dew point display (digital display): 1°C unit
Energy-saving dew point sensor: Yes
Energy saving dew point setting function: -60°C~0°C (1°C unit)
*The amount of processed air is converted to the suction condition of the air compressor. (Atmospheric pressure, 32 degrees C, 75%)
*The treatment conditions were inlet air temperature, humidity: 35°C/saturation or less (no water droplets), inlet air pressure (gauge pressure): 0.7 MPa, and ambient temperature: 32°C.
*If the machine is operated for 24 hours continuously, it is recommended to install a refrigeration dryer in the front stage or use air treated by a refrigeration dryer.
*If the machine is operated continuously for 24 hours, install a backup machine just in case.
*We can also make other specifications, so please ask us separately.
*The sensor may deteriorate if it is used or stored in the following atmosphere. (Organic gases, acetic acid, ammonia chloride, ethyl acetate, xylene, butanol, dichloroethane)
*The dew point of -60°C is a special specification because it is a dedicated orifice.
*Be sure to check the piping system design standards in the product specifications before installation.
*When the inlet air temperature is 7°C or more higher than the ambient temperature, be sure to install an aftercooler (optional) or a refrigeration air dryer.
*Be sure to install an air tank in front of the air dryer.