It is an environmentally-friendly CFC-free air dryer.
Water vapor in compressed air is adsorbed and removed by an adsorbent (desiccant).
*The product is delivered on the vehicle. If it is necessary for the transportation, loading and installation, please arrange a supplier who can handle it. (The manufacturer cannot arrange it. Thank you for your understanding. )
Specification
Processing inlet air volume (m^3/min): dew point -20°C/0.1, dew point -40°C/0.085
Processing outlet air volume (m^3/min): dew point -20°C/0.086, dew point -40°C/0.071
Processing and regeneration air volume (m^3/min): 0.014
Weight: 7.5 kg
Connection Diameter (Air Inlet/Outlet): Rc3/8
Fluid Used: Compressed Air
Working (gauge) pressure: 0.39~1.0 MPa
Ambient temperature: 2~40°C
Input air temperature humidity: 5~50°C saturation or less (no drain water)
Power: Single phase 100~230 V 50/60Hz
Dimensions: 113 x 260 x 470 mm
Accessory Inlet Filter Element: MSF75D/EMS75 H
Attached Outlet Filter Element: LSF75B/ELS75
Dew point display (digital display): None
Energy saving dew point sensor: None
Energy saving dew point setting function: None
*The amount of processed air is converted to the suction condition of the air compressor. (Atmospheric pressure, 32 degrees C, 75%)
*The treatment conditions were inlet air temperature, humidity: 35°C/saturation or less (no water droplets), inlet air pressure (gauge pressure): 0.7 MPa, and ambient temperature: 32°C.
*If the machine is operated for 24 hours continuously, it is recommended to install a refrigeration dryer in the front stage or use air treated by a refrigeration dryer.
*If the machine is operated continuously for 24 hours, install a backup machine just in case.
*We can also make other specifications, so please ask us separately.
*The sensor may deteriorate if it is used or stored in the following atmosphere. (Organic gases, acetic acid, ammonia chloride, ethyl acetate, xylene, butanol, dichloroethane)
*Be sure to check the piping system design standards in the product specifications before installation.
*When the inlet air temperature is 5°C or more higher than the ambient temperature, be sure to install an aftercooler (optional) or a refrigeration air dryer.
*Be sure to install an air tank in front of the air dryer.