INC 125 FS digital is a patented incubator shaker with a removable shaking table.
If the shaking platform is removed, it can be used as a normal incubator.
Up to 6 grid shelves (no shaking platform) can be installed in the large 125 liter chamber.
High temperature stability and uniform shaking motion to increase oxygen supply make it a suitable solution for cell culture and other microbiological applications.
Since the shaker table can be pulled out to half (with line display), you can comfortably shake without worrying about the inclination.
The threaded grid on the platform allows the installation of securing clips and STICKMAX adhesive mats for various containers and sizes. (* Sold separately)
The temperature can be adjusted automatically in decontamination mode (100°C or 120°C) by the automatic detection function of the shaking table.
The excitation function stops automatically when the door is opened.
The shaking function and temperature control function can be used independently.
Corrosion-resistant material AISI 304 square round processing and flat surface make the inside easy to clean.
The optional drip pan can be used as a water reservoir to increase the humidity of the compartment as well as to increase the safety of overflowing liquids.
It is equipped with decontamination mode (100/120°C) for sterilization and cross contamination reduction.
Achieves a wide temperature range from RT +8°C to 80 °C.
Superior insulation inside the chamber and triple glass doors with windows provide high temperature control and energy efficiency.
The electronically adjustable fan speed (0 ~ 100%) allows the internal air circulation to be affected.
Uses a large, easy-to-read liquid crystal display.
It has a large viewing window and switchable interior lighting for viewing samples.
The counter, timer and timer auto (temperature control) functions provide highly reproducible test conditions.
Up to two devices (incubator shaker or incubator) can be stacked. (Corresponding accessories required)
The shaking table can be used with 20 mm or 25 mm shaking strokes.
Specification
Heating output: 750 W
Minimum temperature: room temperature +8 -80 degrees C
Adjustment and display resolution: 0.1 K
Temperature stability (37 degrees C @22 degrees C): +/- 0.1 K
Temperature uniformity (37 degrees C @22 degrees C): +/- 0.2 K
Temperature Heating Time (37 °C @22 °C): 12 min
Temperature door recovery time (37 °C @22 °C): 2 min.
Temperature display: yes
viewing: LCD
Maximum timer setting: 100 d
Number of trays loaded max: 6
Load capacity max of tray: 20 kg
Working Range (Internal Container): 550 x 550 x 415 mm
Internal Container Capacity: 125 l
Temperature safety device according to DIN 12880: TB class 1
Limiter with breaker: yes
Doors with windows: yes
Temperature sensor control: PT 100 4 lines
Cleaning thermal contamination (100 °C/2 h): yes
Track diameter: 20 mm
Speed range: 10 -300 rpm
Speed deviation: +/- 5 rpm
Maximum swing weight (including attachment): 7.5 kg
Plate Size: 340 x 480 mm
Power consumption at 37 °C: 85 Wh/h
Body Dimensions (W x H x D): 700 x 720 x 635 mm
Weight: 70 kg
Allowable ambient temperature: 15 -32 °C
Allowable Ambient Humidity: 0.8
DIN EN 60529 Standard Protection Class: IP 20
USB interface: yes
Voltage: 200 -240 V
Frequency: 50/60 Hz
Output: 850 W
Maximum input: 850 W
Output Standby: 2W
Fuse: 2x T5.0A 250 V
Accessories: IO SP20 Shaker Platform, IO T2.10 Wire Grit Trays (2), Tilt Protector, USB Cable, Factory Calibration Certificate, Power Cord