Cross movement holder for optical fiber machined with SMA connector.
Use to collimate light from a fiber or to introduce light into a fiber (MMF), such as a compact spectrometer.
You can choose from two types: a type of screw with simple adjustment (FOP-SMA) and a type of coarse fine adjustment (FOP-DM-SMA).
There is a FOP-1 SMA with only a cross motion adjustment mechanism and a FOP-2 SMA with a fiber tilt adjustment mechanism that can precisely adjust the center of the collimated beam brightness distribution.
The SMA receptacle in the SMA-type optical fiber holder can be removed and replaced with a fiber adapter for plain fiber (MFH-ADP).
Cross movement holders for FC connector (FOP) and for plain fiber (MFH) are also available.
* If the optical fiber is inserted or removed, the holder adjustment may move.
* When the optical fiber is reinserted, the adjustment mechanism of the holder needs to be adjusted again.
* The SMA connector has a short nut, so it is difficult to fasten it to the end with your finger.
* Use a narrow tip tool such as a radio pliers for fastening or removing.
Specifications
[ common specification]
Main material: Aluminum
Surface treatment: Black anodic oxide
[Individual specification]
Adjustment range, up and down, left and right: ±1mm
Adjustment range, tilt, rotation: ?
Coarse resolution, up and down, left and right: 0.5mm/rotation
Fine resolution up and down, left and right: 0.05mm/rotation
Minimum scale reading, up and down, left and right: 0.0025mm/DIV