Thin metal foil with small holes or slits of 400 μm or less.
It is used for special filters, laser diffraction experiments, and microscope magnification calibration.
High roundness holes and high parallelism slits have been realized by precision etching.
For YAG laser (1064 nm) and CO2 laser (10.6 μm), use high energy laser pinhole coated with high reflectivity gold on high heat conduction copper.
Pinhole foil (or slit foil) is held in an aluminum frame so it can be easily handled.
Iris aperture (IH) is available when any aperture larger than φ1mm is required.
* If dust adheres to the pin hole, light may not pass through the hole.
* If light does not pass through the hole, blow the area around the hole with an air blower.
* Pinhole foil and slit foil are very thin and fragile.
* Pressing it with your finger or poking it with a sharp object may tear the foil.
* The holes can hardly be seen visually.
* Please check using a high magnification microscope.
* For the orientation of the fixed slit, check the position of the marking indicating the slit width.
* Even pinholes for high-power lasers may be damaged if the pulsed laser is focused.
* When using for high power laser or pulse laser, calculate the energy density of the laser spot and confirm that it does not exceed the damage threshold before use.