The opening of the water tank is wide and many samples can be processed at once.
The height can be adjusted with the attached shelf board, and the height of the container can be adjusted.
Equipped with a circulation pump, it can cool, heat, and maintain constant temperature not only inside the tank but also outside containers.
It is suitable for use in density, dynamic viscosity measurement, observation of changes in the physical properties of metallic resins, confirmation of solubility, observation of precipitation, pre-cooling, and thermostatic holding.
Specifications
Model number: TRL-101FEP
Temperature adjustment range (℃): -10 to +60
Cooling capacity: 500W
External dimensions: 650 x 380 x 755mm
Chamber dimensions: 400 x 300 x 300mm
Window dimensions: 262 x 130mm
Capacity: 32L
Temperature stability: Within ±0.05℃
Temperature adjustment: Digital temperature indication controller, PID control system
Timer: Operation by auto start or auto stop timer (MAX 99 hours 59 minutes)
Heater: Cartridge heater 1kW
Refrigerating machine: Air-cooled type 250W HFC-134a
Cooling capacity: About 500W (430kcal/h water temperature +20℃ 50Hz)*
Using medium solution: Water, Ethylene glycol system (brine)
Agitator: Jet stirring method magnet pump
Circulation pump: 20W magnet drive type pump maximum head 2m, maximum flow rate 10L/minutes, maximum discharge pressure 0.02MPa
Circulation IN-OUT: Outer diameter φ12 hose port (Rp3/8)
Safety device: Electrical leakage breaker, Self-diagnosis function (HC: Excessive rise prevention, LC: Low temperature prevention, Water level decreased, Frozen machine protection circuit, Temperature sensor abnormal, Frozen machine pressure abnormal, Incorrect setting prevention)