The throw-in thermostat IC basic is designed to be easy to install in a bathtub.
Can be heated up to 250°C by gently circulating in the bathtub.
With a powerful discharge and built-in suction pump, it is possible to heat and circulate the sample in the container or directly into the bathtub.
Can be connected to an external cooling water circulation device for adjusting the outside air temperature.
All IKA thermostats are UL marked and meet safety standards such as DIN12876.
The heating rate is fast and the temperature accuracy is ±0.02 K.
Temperature setting range; Room temperature to 250°C.
Uses an extendable inlet, so containers with different capacities can be installed.
Adjustable maximum safe temperature. Uses a powerful discharge and suction pump.
Adjustable maximum safe temperature.
Large, easy-to-read LED display: Pump speed, temperature.
Use the dial push buttons for intuitive operation. PT100 temperature sensor can be connected.
Warning messages can be checked by sound and text. Built-in USB/RS232 for control and recording via a computer (Requires software sold separately or can be updated with firmware).
M16 x 1 standard connection included.
Specifications
Appliance type: Immersion thermostat
Category of DIN 12876 compliance: III
Identification of DIN 12876 compliance: FL
Heating output: 2500W
Minimum work temperature: -20
Maximum working temperature: -200
Heating temperature range: Room temperature +10K at 1000rpm - 200
Temperature control: PT100
Temperature sensor: PT100
Safety temperature sensor: PT1000
Constant temperature holding: DIN 128760.02 +/- K
Mounting connector for temperature sensor: PT100
Display resolution: 0.1 +/-
Heating control accuracy: 0.1 +/- K
Minimum value of safety device: 0
Maximum value of safety device: 260
Pump shape: Suction pressure
Maximum pump pressure (discharge flow, 0 liter): 0.45bar