Specifications
- Operating temperature (deg. C): -10 to + 80 (including temperature rise at connection)
- Protection rating: IP 66
- Operating humidity range: 35 ~ 85% RH (no icing)
- Heat-resistant temperature (degrees Celsius): (resin) + 125
- Storage temperature and humidity range: -10 to + 60 degrees C/35 ~ 85% RH (no freezing or condensation)
- Connectable wire (mm 2): 0.75 or less, finished outer diameter 1.5 mm -2.8 mm
- *Cut the grommet according to the outside diameter of the wire before use.
- (Stepped Brommet)
- Stage1:1.5mm-2.1mm(VSF0.3mm2)
- Stage2:2.2mm-2.5mm(VSF0.5mm2)
- Stage3:2.6mm-2.8mm(VSF0.75mm2)
- Fuse Holder for Relay F -800
- Protective cover for connecting parts, such as crimped sleeves and crimped terminals * Not for use under the Electrical Appliances and Material Safety Act (PSE). *To avoid the risk of electric shock, do not open the cap with the voltage applied. *It can not be used underwater. *Water may enter the product depending on the operating conditions. Please use after checking thoroughly. *Do not use the product outdoors or in direct sunlight. *Condensation may occur inside due to changes in ambient temperature. Remove condensation or use in a place where the ambient temperature changes little. *Depending on the type of solvent or oil, the product may crack or dissolve, so please be careful. *When you run the wire through the grommet, press down on the grommet.
-- Products images and contents from AS ONE website --
